ROHDE & SCHWARZ FSQ26 REPAIR and ROHDE & SCHWARZ FSQ26 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ROHDE & SCHWARZ FSQ26. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ FSQ26 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ROHDE & SCHWARZ FSQ26 (1155.5001.26)   Description / Specification:    
ROHDE & SCHWARZ FSQ26 26.5 GHz Signal Analyzer

The R&S FSQ26 20 Hz to 26.5 GHz Signal Analyzer offers very low phase noise, unsurpassed low residual EVM, a wide dynamic range and above-average accuracy, making it the ideal high-end measuring instrument for development applications, where tolerances and limit values must often be lower than defined in a standard. Specifications. Frequency range: 20 Hz to 26.5 GHz. RF Performance: DANL with preamplifier < -152 dBm (10Hz); SSB phase noise typ. - 133 dBc (1Hz) at 10 kHz offset, CF 640 MHz; Phase-noise typ. - 160 dBc/Hz @ 10 MHz offset, CF 640 MHz; TOI typ. ±25 dBm; 1-dB-compression point + 13 dBm; 3GPP ACLR 77 dB, 84 dB with noise correction; ACLR for 4-carrier scenario: 77 dB with noise correction. Accuracy: 0.3 dB total level uncertainty up to 3.6 GHz; <0.1 dB linearity error down to -70 dB . IQ Downconverter: IF digitizer 14 bit 81.6 MHz (20.4 MHz IF); IF digitizer 326.4 MHz (option FSQ-B72); IQ Bandwidth (RF) 28 MHz (up to 120 MHz mwith option FSQ-B72); SFDR > 80 dB; IQ memory 16 Msamples each I and Q; output via GPIB or LAN; Sample rate: cont. settable from 10 kHz to 81.6 MHz; e.g. 20 MHz for IEEE802.11a. Speed: 2.5ms sweep time in frequency domain; 1 µs sweep time in time domain; up to 70 remote measurements/s via GPIB; up to 80 manual measurements/s (screen update).



 

Standard Calibration $665.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ FSQ26. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Adjacent Channel Power
Adjacent Channel Power is the power from a modulated communications channel that leaks into an adjacent channel. This leakage is usually specified as a ratio to the power in the main channel, but is sometimes an absolute power.

Fall Time
Fall time is the time required for the amplitude of a pulse to decrease (fall) from a specified value (usually 90 percent of the peak value exclusive of overshoot or undershoot) to another specified value (usually 10 percent of the maximum value exclusive of overshoot or undershoot).

Overshoot
Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Please contact us for your ROHDE & SCHWARZ FSQ26 REPAIR and/or ROHDE & SCHWARZ FSQ26 26.5 GHz Signal Analyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: